CP5070-2021-2B04-Group5-Z.Danial

Step by step on how to make a keyring prototype using Fusion360. Click on “Create a Sketch” (1) and select any plane (2). Click on “2-Point Rectangle” (3) and input measurements 65mm X 25mm. Select “Offset” (4) and click on the rectangle. Offset the sketch by -2mm. Select “Fillet” (5) and click on the 4 outer corners of the rectangle. Type 5mm and press Enter. Click on “Line” (6) to create a line down from the top to the bottom on the left side of the rectangle. Right-click on the line and select “Normal/Construction”. Select “Dimension” (7) and click on both lines (circled in red). Change dimension value to 7mm. Open “Create” and click on “Point” (8) to create a point in the middle of the line (Denoted by a triangle). Click on “Centre Diameter Circle” (9) and draw a 5mm circle from the point that was recently created. Select “Create” > “Text”. Type one short word with your desired font and adjust the height to fit the rectangle. (Using “Alignment” (10) makes adjusting easier). On...

Welcome. I am, Danial or Z.Danial (since there is another Danial in the class), the one with dyed hair and looks Chinese. So yes, I am mixed, Chinese Malay but I consider myself a free thinker. I am from group 5 and my role is time manager so I basically make sure things are submitted on time. This is me playing with a childhood toy at 18 years old...  In my free time, I usually play games such as league and valorant mostly with friends and my CCA right now is SP track and field. I also work at an Ice Cream Cafe called "Apiary" at Neil Road so drop by and come support. So for two personal goals, I wish to achieve from the CP5070 module is to first and foremost improve and expand my use of fusion 360. So to achieve this I had thought of going out of my way to play around with fusion360 or watch videos on people showing shortcuts and fusion360. I will know when I have achieved this goal once people start seeking help from me on fusion360 whenever we are using fusion360. The sec...